Five Dangerous operations that will ruin the UV Flatbed Printer

Many people have only heard of the greatness of the UV flatbed printer. It can leave the same beautiful pattern on the original material as the original picture, which is why it has the reputation of universal printer. However, most people think that UV flatbed printers can only print certain specifications of paper like ordinary printers, so even if customers spend money to buy quality products, they will be deceived because of poor operation. a feeling of.

Proper operation of the UV flatbed printer will reduce the problem and increase the profit!
Today, I will introduce you to the precautions and dangerous operations of UV flatbed printers.

Note on using uv flatbed printers:
1. When the UV flatbed printer adjusts the height, although there is infrared detection object height, the product should be placed and leveled.
2. When the UV flatbed printer is working, it is forbidden to put other items on it, and when it is not used for a long time, the power should be pulled out.
3. When the nozzle is in a high temperature state, it is forbidden to contact before the temperature drops to prevent burns; when the thunderstorm occurs, the power plug can be pulled out from the socket in time to protect the safety of the machine.
4, when adding a coating to the product, a layer of coating on the surface can be, evenly, not too thick.
5. It is not possible to disassemble, move or drag the machine at will. If there is any fault, it should be contacted with the after-sales personnel in time.
6. If the printer generates heat, smoke, odor, abnormal sound, etc., please turn off the power and contact the technician immediately.

Several dangerous operations using UV flatbed printers:
1. The brute force adjusts the nozzle, and the position of the nozzle is not regulated by the external force. Whether it is replacing or fine-tuning the nozzle, do not use brute force. The nozzle must be treated with caution according to the specifications.
2. Switch the circuit at will, install and disassemble the UV flatbed printer circuit without turning off the power switch and cutting off the main power supply. This behavior will damage the service life of each system, especially for the nozzle.
3. Use the cleaning agent without cleaning to clean the nozzle, so the nozzle is very easy to be contaminated and worn, so be sure to use the manufacturer's designated products and quality inspection products to clean the nozzle.
4, high pressure on the nozzle cleaning, if the nozzle is slightly blocked, it is recommended to use a vacuum cleaner to suck out the dust, and then carefully clean.
5, immersion cleaning, although the nozzle is placed in the cleaning solution for a long time soaking can effectively clean the stain, but the cleaning solution has a certain degree of corrosiveness, if the time exceeds 48 hours, it will affect the nozzle orifice, so generally only Take an appropriate amount into the nozzle for cleaning.

UV flatbed printers are expensive, and attention to operating details and maintenance can bring you even greater wealth.

The Reason And Solution of UV Printer Flying INK

When we use uv printers, the most worrying problem is that we will encounter flying ink when printing patterns. It is well known that the products printed by uv printers are high-precision products, if flying ink appears when printing. Problems can cause the printed product to be unsatisfactory and affect the printing results.

So what is the cause of the printer flying ink? Is there any way to solve this problem? Here are some common reasons for the common use of uv universal flatbed printer nozzles and corresponding solutions.

Reason 1: UV printer equipment nozzle disconnection
Solution: Print the test strip to check the condition of the nozzle. If it is found to be blocked or faint, you need to clean the channel of the nozzle to keep it open.

Reason 2: UV printer nozzle is too far from the substrate
The reasonable height is generally below 10cm, the ejection force of different nozzles, and the distance from the substrate is between 1mm-20mm. If the spray range of the nozzle itself is exceeded, it will cause flying.

Solution: Reduce the distance between the nozzle and the substrate.

Reason 3: printer electronic control system
The electronic control system controls the pulse spacing of the nozzle ignition to be unreasonable.

Solution: Requires a technician to solve it. Buying UV printers from Black Mai Digital Technology, we will have an excellent after-sales team to solve the problem for you.

Reason 4: uv printer nozzle voltage is too high
The voltage displayed on the head panel indicator lights, whether it is red or not, alarm. If this happens, you need to lower the voltage of the nozzle.

Solution: If it is a modified circuit board, you need to change the circuit.

Cause 5: Static electricity generated during printing
When the environment is dry and the humidity is low, static electricity is generated, causing static electricity between the nozzle and the material.

Solution: Add a ground wire and add a static bar.

Along with the technological innovations of the entire industry, UV printers are becoming more widely used and are recognized by more corporate structures. If the uv printer has a problem of flying ink during the printing process, it will cause great trouble to the production efficiency. Once this problem occurs, it should solve the problem of flying ink of the UV printer in time, bringing higher efficiency to the production, and also for the user. Create value that far exceeds the device itself.