In winter, due to the cold weather, some components of the uv flatbed printer may undergo subtle changes, resulting in some strange faults, such as printer head impact. These faults are not only time-consuming and costly to repair, but more importantly, they will affect The progress of production. This shows how important the maintenance of winter uv flatbed printers is. Here, we first share three reasons for the common print head impact phenomenon in winter.
The lubricating effect of the lubricating oil is weakened. Due to the cold and dry winter, the uv flatbed printer works in a dry environment, and the ambient temperature is too low, which will weaken the lubrication effect of the lubricating oil on the guide rail of the printer, which will increase the friction when the carriage moves on the guide rail. , it will be easy to appear the impact of the print head.
UV flatbed printer is too dusty. Due to the large wind and sand in winter, too much dust falls on the uv flatbed printer, which causes the friction of the word car on the guide rail to increase, and the print head collides.
UV flatbed printer has foreign objects inside. For the newly purchased printer, the user is not very familiar with the uv flatbed printer, and the packaging materials are not completely removed, which is most likely to occur. Therefore, the newly purchased machine must be removed according to the requirements of the user manual.
According to the analysis of the above reasons, in order to avoid the collision of the print head, it is necessary to carry out maintenance and maintenance from the source of the fault. Below we will talk about the matters needing attention in routine maintenance.
The use of uv flatbed printer in winter, the uv flatbed printer should be placed in a normal working environment, should ensure that the operating room to maintain ambient humidity above 25 degrees, the temperature is maintained between 10-35 ° C, relative humidity of 20 -80%; if the equipment is not used for a long time, the ink should be drained and cleaned with a special cleaning solution to keep the ink head unblocked.
Use the three-phase power plug correctly to ensure that the power supply of the equipment is grounded correctly.
Static electricity will interfere with the normal operation of the equipment, ink head ink will be unstable, in serious cases can cause the motherboard, ink head is burned, so to prevent static interference. Before operating the UV flatbed printer, the operator should wash his hands and strictly follow the operating procedures in the manual. Once the static interference occurs, stop the operation immediately and check the current working environment.
Special reminder to pay attention to the daily maintenance of winter uv flatbed printer, love your own machine, only pay attention to detail maintenance, in order to avoid some troublesome machine failure, but also extend the life of your uv flatbed printer.